acdraindrps
Member
The customer wants a display to automatically pop up when a button/numeric input on the HMI is pressed, and ask something like "Are you sure?" With buttons Yes and No. No button would just revert back to previous display, and yes button would allow the original button that was pressed' operation to be performed (such as turning on and off a pump or changing a numeric input like a heater set point) as well as return to the previous display.
I would like to stay away from VBA, as I don't have any experience with it - but am not totally opposed if its something as simple as a few lines of code. Sadly, this might be the only way to achieve what I want to do?
Any help with the matter is greatly appreciated.
I'm running FTViewSE and RSLogix5000 with a 1769-L33ER controller.
I would like to stay away from VBA, as I don't have any experience with it - but am not totally opposed if its something as simple as a few lines of code. Sadly, this might be the only way to achieve what I want to do?
Any help with the matter is greatly appreciated.
I'm running FTViewSE and RSLogix5000 with a 1769-L33ER controller.