I keep having a number of customers requesting that I provide remote access to their PLCs for remote troubleshooting purposes. The way that I have done this in the past is to install an small industrial PC in a panel with the appropriate programming software installed. The customer provides internet access to the machine and will plug the ethernet cable in when they want me to have access. I typically will use Logmenin or PC Anywhere to control the remote machine and use it to assist in troubleshooting.
This has worked out well in the past. Since this is becoming more and more common these days, what other techniques have people achieved this?
Giz
This has worked out well in the past. Since this is becoming more and more common these days, what other techniques have people achieved this?
Giz