jthornton
Member
I have one customer that i programmed a parts per minute display. I used without much thought on my part the "number of parts per time period" method. Count the number of parts in 10 seconds multiply by 6 and there you go. Not! the machine if it has one more or one less the display jumps by enough to concern the customer. Ok If I use a longer time period that will smooth it out but the delay in speed changes will be slow.... If I use time per number of parts I feel that I will be in the same boat... Is there a slick way to do a running average that will not jump around alot?
TIA
John
TIA
John