Casby
Member
New user and 6 months into Crimson 3.0. Reading through the forums here has been extremely helpful and I can't thank you all enough for the valuable info on this site.
I've been working on a Crimson 3.0 project for the last few months with multiple users setup in security (restricts page access). I have 4- G12 panels and am using Modbus TCP to share tag data between them. From an operators perspective all 4 panels/programs look identical and respond to input from any of the 4 panels. Behind the scenes there is 1 master and 3 slaves (slaves are identical .cd3 files with unique IP's). These panels are in a remote facility and I have been uploading program revisions via TCP while not on site. I have supervisors setup to view the live panels from the webserver and I have disabled remote control to prevent accidental button presses.
All users have maintenance access so they are not logged of automatically. I also created a program to automatically return "home" after any page times out. The actual "Home" page is based on the current users security level. Communications and security are working good (All thanks to Crimson!).
Now to the QUESTION:
I would like to login a user automatically so I can display the proper "home" page when the units are powered up/and or after a program update . Is it possible to logon a user using a program or custom code?
I've been working on a Crimson 3.0 project for the last few months with multiple users setup in security (restricts page access). I have 4- G12 panels and am using Modbus TCP to share tag data between them. From an operators perspective all 4 panels/programs look identical and respond to input from any of the 4 panels. Behind the scenes there is 1 master and 3 slaves (slaves are identical .cd3 files with unique IP's). These panels are in a remote facility and I have been uploading program revisions via TCP while not on site. I have supervisors setup to view the live panels from the webserver and I have disabled remote control to prevent accidental button presses.
All users have maintenance access so they are not logged of automatically. I also created a program to automatically return "home" after any page times out. The actual "Home" page is based on the current users security level. Communications and security are working good (All thanks to Crimson!).
Now to the QUESTION:
I would like to login a user automatically so I can display the proper "home" page when the units are powered up/and or after a program update . Is it possible to logon a user using a program or custom code?