Opening a .RSS file without RSLogix - Page 6 - PLCS.net

discgoguy · May 26th, 2023, 06:28 PM

Quote:

Originally Posted by plvlce

You could have used either RSLogix Micro (only supports MicroLogix) or RSLogix 500 (also supports SLC)

As git noted, since this is a ML 1000 even the free "Micro Starter Lite" version can be used.

Thanks guys, I appreciate the help. I did get RSLogix installed and actually remembered the password on the first try! That video that drbitboy recommended really helped. Thanks again!

discgoguy · May 26th, 2023, 06:35 PM

Quote:

Originally Posted by drbitboy

https://www.youtube.com/watch?v=tJLEx44HacY

Thank you for the link, super helpful! Still works!

rami77 · June 20th, 2023, 04:38 AM

I have RSS file and I need some data (as per the screenshots attached) as CSV or Excel.

geniusintraining · June 20th, 2023, 07:56 AM

See attached

empregister · June 20th, 2023, 04:29 PM

hi - i dont have a old copy of 500. Can someone please open my RSS file and send over in PDF? Thank you.

Operaghost · June 20th, 2023, 04:43 PM

Here you go...wait. It's too big. Please send me a private message with an email I can send to. Unless someone that can post larger files can post it for you.

OG

Mickey · June 20th, 2023, 09:24 PM

Here..

rami77 · June 21st, 2023, 01:17 PM

Thanks for your support.

rami77 · July 18th, 2023, 08:42 AM

Thanks for your help

I have another question. How can we receive the data from N7:0 and N11:0 on computer?
Is there a serial cable connection can be made to receive this data on a COM port?

forqnc · July 19th, 2023, 07:06 AM

Quote:

Originally Posted by rami77

Thanks for your help

I have another question. How can we receive the data from N7:0 and N11:0 on computer?
Is there a serial cable connection can be made to receive this data on a COM port?

rami77, you will need to be connected to the PLC and then setup DDE/OPC link.
Check out this video.

https://www.youtube.com/watch?v=pERxjWUaRUI

rami77 · July 20th, 2023, 03:32 AM

Quote:

Originally Posted by forqnc

rami77, you will need to be connected to the PLC and then setup DDE/OPC link.
Check out this video.

https://www.youtube.com/watch?v=pERxjWUaRUI

Thanks forqnc,
That was so useful for me. Can we use DDE also to log live data to analys it later?

June 20th, 2023, 04:43 PM	#81
Operaghost Member Join Date: Apr 2002 Location: Dallas, TX USA Posts: 3,987	Here you go...wait. It's too big. Please send me a private message with an email I can send to. Unless someone that can post larger files can post it for you. OG __________________ I despise when people take random quotes and ascribe them to me - Julius Caesar Last edited by Operaghost; June 20th, 2023 at 04:56 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
RSLogix 500 file unable to open	isteak007	LIVE PLC Questions And Answers	4	May 27th, 2014 06:07 PM
AB .rss file reader	rizzyboy	LIVE PLC Questions And Answers	7	September 19th, 2013 01:43 AM
Rockwell Allen Bradley Programming Software, RSLogix 5, RSLogix 500, RS Linx, RSLogix	vvcd	LIVE PLC Questions And Answers	21	September 24th, 2009 11:04 PM
Convert slc logistics file (ICOM) to SLC500 (.RSS) ?	katratzi	LIVE PLC Questions And Answers	9	May 3rd, 2006 11:38 AM
Help converting Logicmaster file for opening in GE-ME 5.5	Robertg01	LIVE PLC Questions And Answers	2	February 9th, 2006 11:34 PM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.*

June 21st, 2023, 01:17 PM	#83
rami77 Member Join Date: Jun 2023 Location: Umm al-Qaiwan Posts: 4	Thanks for your support.

July 18th, 2023, 08:42 AM	#84
rami77 Member Join Date: Jun 2023 Location: Umm al-Qaiwan Posts: 4	Thanks for your help I have another question. How can we receive the data from N7:0 and N11:0 on computer? Is there a serial cable connection can be made to receive this data on a COM port?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)