Hello guys!
I´am new here but need some help in configuring a PLC S7-300 with a CP 343-1 LEAN. I´am using Siemens Tia portal v13.
My question is if it is possible to give different authorisation to each ports in properties for CP 343 and where can i find it?
I would like to have read/write access to X1P1 port. When X1P2 port connected, X1P1 will have read access and X1P2 read/write access.
Thank you for helping.
Regards,
Ferenc
I´am new here but need some help in configuring a PLC S7-300 with a CP 343-1 LEAN. I´am using Siemens Tia portal v13.
My question is if it is possible to give different authorisation to each ports in properties for CP 343 and where can i find it?
I would like to have read/write access to X1P1 port. When X1P2 port connected, X1P1 will have read access and X1P2 read/write access.
Thank you for helping.
Regards,
Ferenc
Last edited: