hello, I've recently started using Logix Designer v30 as part of Studio 5000. I've written some code, and I'm trying to find a simulator for debugging.
When I've previously used Codesys 2.3/3.5 or TIA portal, there's a free simulator built in that can run code but not communicate externally (with hmi etc).
Is there an equivalent free tool from Allen Bradley please? I found test mode, but it seems to require hardware to be connected. I've also found studio 500 emulator and softlogix, I'm not sure which one is appropriate and they both require a license.
Any help would be greatly appreciated!
When I've previously used Codesys 2.3/3.5 or TIA portal, there's a free simulator built in that can run code but not communicate externally (with hmi etc).
Is there an equivalent free tool from Allen Bradley please? I found test mode, but it seems to require hardware to be connected. I've also found studio 500 emulator and softlogix, I'm not sure which one is appropriate and they both require a license.
Any help would be greatly appreciated!