Dear sir/madam,
One of my projects is designed running at RIO using SLC 500. In my remote chassi (1746-A10):
slot 0 = 1747-ASB
slot 1 = 1746-NI16V (word 0 & 1) Block transfer
slot 2 = 1746-OB32 (word 2 & 3) O:e.2/0 to O:e.3/15
slot 3 = 1746-IB32 (word 4 & 5) I:e.4/0 to I:e.5/15
slot 4 = 1746-IB16 (word 6 & 7) I:e.6/0 to I:e.6/15
slot 5 = 1746-NI16I (word 0 & 1) Block Transfer
slot 6 = 1746-IB32 (word 2 & 3) I:e.10/0 to I:e.11/15
slot 7 = 1746-IB32 (word 4 & 5) I:e.12/0 to I:e.13/15
Note: - slot 5 using logical rack 1
- e indicate slot number for 1747-SN
1) What would be the best slot type for this design?
2) I was thinking 1/2 slot addressing is the only way, am i right?
3) If I'm using 1 slot addressing, slot 1 using 1746-NI16V slot 2 using 1746-OB32, is there any conflict?
Thanks.
Regards,
CK Chew
One of my projects is designed running at RIO using SLC 500. In my remote chassi (1746-A10):
slot 0 = 1747-ASB
slot 1 = 1746-NI16V (word 0 & 1) Block transfer
slot 2 = 1746-OB32 (word 2 & 3) O:e.2/0 to O:e.3/15
slot 3 = 1746-IB32 (word 4 & 5) I:e.4/0 to I:e.5/15
slot 4 = 1746-IB16 (word 6 & 7) I:e.6/0 to I:e.6/15
slot 5 = 1746-NI16I (word 0 & 1) Block Transfer
slot 6 = 1746-IB32 (word 2 & 3) I:e.10/0 to I:e.11/15
slot 7 = 1746-IB32 (word 4 & 5) I:e.12/0 to I:e.13/15
Note: - slot 5 using logical rack 1
- e indicate slot number for 1747-SN
1) What would be the best slot type for this design?
2) I was thinking 1/2 slot addressing is the only way, am i right?
3) If I'm using 1 slot addressing, slot 1 using 1746-NI16V slot 2 using 1746-OB32, is there any conflict?
Thanks.
Regards,
CK Chew