Hello all.
I have some problems with the Load Memory RAM on a Siemens S7 CPU 318-2 (6ES7 318-2AJ00-0AB0 fitted with a 512kb flash MC 6ES7 951-0KJ00-0AA0) on one of our machines.
I need to make some basic changes in the program and adding some minor new functions but the load memory ram is full so i cant download the block or any block to the CPU.
The memory bar under Module Information looks like this:
When i go online and look at the blocks it says one third of them are in RAM in the Load Memory while the rest is in EPROM.
I havent worked much with S7-300 other then updating and downloading blocks so im not sure what to do and this is a big and advanced machine so im a bit afraid of screwing something up.
I would really like to fix this memory issue its really bugging me
I appriciate any help on this i can get
I have some problems with the Load Memory RAM on a Siemens S7 CPU 318-2 (6ES7 318-2AJ00-0AB0 fitted with a 512kb flash MC 6ES7 951-0KJ00-0AA0) on one of our machines.
I need to make some basic changes in the program and adding some minor new functions but the load memory ram is full so i cant download the block or any block to the CPU.
The memory bar under Module Information looks like this:
When i go online and look at the blocks it says one third of them are in RAM in the Load Memory while the rest is in EPROM.
I havent worked much with S7-300 other then updating and downloading blocks so im not sure what to do and this is a big and advanced machine so im a bit afraid of screwing something up.
I would really like to fix this memory issue its really bugging me
I appriciate any help on this i can get