JakBeux
Member
I got a 1761 NET-ENI module successfuly hooked up to a micrologix 1000 PLC, I got also a RedLion G3 Kadet6 with ethernet port hooked up to the same 4 port 10BaseT Hub as the NET-ENI. I got further my PC connected to this hub and managed to get on line simutaneously to both the Redlion and the Micrologix via the NET-ENI. I can do program changes to both, no problem. I must have missed something since I just can't get the Redlion to read an integer value out of N7:0 and neither can I bring a status change about in let say B3:0 when pressing a button on the redlion HMI that is configured as a Variable tag B3:0 in PLC1 where PLC1 communications is set up as Ethernet with a TCP/IP address etc.
How can I get the PLC and Redlion to talk to each other i.e. exchange bit status values and integer values?
Can anybody please h E L PP ! This drives me nutters. LOL
How can I get the PLC and Redlion to talk to each other i.e. exchange bit status values and integer values?
Can anybody please h E L PP ! This drives me nutters. LOL