My RSLinx Classic using ETHIP driver to communicate with RSLogix5000, it can browse the controller but when i tried to read the data via OPC Client the result has "invalid data".
This is an existing configuration and the data can be reads normally before (good), but suddenly the data becomes bad.
I've tried to renew the Topic Name and renew the driver configuration using both ETHIP and ETH driver, i've tried to clear cache but it doesn't work.
any suggestion for this? thanks in advance
This is an existing configuration and the data can be reads normally before (good), but suddenly the data becomes bad.
I've tried to renew the Topic Name and renew the driver configuration using both ETHIP and ETH driver, i've tried to clear cache but it doesn't work.
any suggestion for this? thanks in advance