I recently made up some code to practice indexing and was told there was no way it would work. The code is as follows.
Oil_Complete is a latched pushbutton from the panelview that unlatches in the code so we can skip over unused steps. I just wanted to know if this could work or if someone can put me in the correction direction in making this work. I have no access to a PLC to test this on at the moment. The broken-down, longhand version of this code looks like this.
Any help would be hugely appreciated! Thank you in advance!
Oil_Complete is a latched pushbutton from the panelview that unlatches in the code so we can skip over unused steps. I just wanted to know if this could work or if someone can put me in the correction direction in making this work. I have no access to a PLC to test this on at the moment. The broken-down, longhand version of this code looks like this.
Any help would be hugely appreciated! Thank you in advance!
Last edited: