This is an allen bradley slc 5/05 processor. This is not homework, this is actually job related. Trying to keep track of jars for seperator unit. I am using a bsl instruction. I have an input I:1/1 then B3:0/1 and B3:0/1 is addressed to the bsl instruction. When I:1/1 sees a jar it is loaded to bsl instruction. Problem is i want to use a osr instruction between I:1/1 and B3:0/1 but when I do nothing is loaded into the bsl instruction. When I bench test this without the osr I getI:1/1 loaded into bsl instruction several times. I used a timer to get this fixed but would like to know why osr did not work. any replies welcomed. I hope this all makes sense, since I am unable to show it logic form.
Thanks,
Mossman
Thanks,
Mossman