Good morning,
I would like to know what triggers the
Local:3:I.StatusRegister.Fault bit. (on 1756-DNB)
Client has deconnected a devicenet device, and it has made a fault in devicenet network.
I do not know which error number was shown at the time of fault.
Is it only error #81 that triggers the fault bit ?
A disconnected device would normally set the devicefailure bit and show which node(s) is/are missing. So what could have caused the Dnet fault?
Thank you !
(I checked first in Rockwell documentation, but found myself lost on alien ground...)
I would like to know what triggers the
Local:3:I.StatusRegister.Fault bit. (on 1756-DNB)
Client has deconnected a devicenet device, and it has made a fault in devicenet network.
I do not know which error number was shown at the time of fault.
Is it only error #81 that triggers the fault bit ?
A disconnected device would normally set the devicefailure bit and show which node(s) is/are missing. So what could have caused the Dnet fault?
Thank you !
(I checked first in Rockwell documentation, but found myself lost on alien ground...)