mrsoliveira
Member
Hi all,
somebody can explain how to configure this situation:
SLC5/04 - 1747-L542B;
RACK - [size=-1]1746-A13;
Remote I/O Scanner - 1747-SN;
Remote I/O - 1794-ASB;
[/size]1794-IB16;
1794-IB16;
1794-IB16;
1794-OB16;
1794-OB16.
The connection is in one side a PLC without I/O cards, i put the scanner on last position in rack (12).
I just use one remote bus with 3 1794-IB16 and 2 1794-OB16. I use original rockwell cable and resistor.
I need help about how to configure G File, and read and write I/O's.
I look this link http://www.ab.com/support/abdrives/...250&rdepth=0&sufs=1&order=r&cq=&id=466c5fd83b, but i don't know about it is a software to configure.
Since already grateful for any help.
M.Oliveira
[size=-1][/size][size=-1][/size]
somebody can explain how to configure this situation:
SLC5/04 - 1747-L542B;
RACK - [size=-1]1746-A13;
Remote I/O Scanner - 1747-SN;
Remote I/O - 1794-ASB;
[/size]1794-IB16;
1794-IB16;
1794-IB16;
1794-OB16;
1794-OB16.
The connection is in one side a PLC without I/O cards, i put the scanner on last position in rack (12).
I just use one remote bus with 3 1794-IB16 and 2 1794-OB16. I use original rockwell cable and resistor.
I need help about how to configure G File, and read and write I/O's.
I look this link http://www.ab.com/support/abdrives/...250&rdepth=0&sufs=1&order=r&cq=&id=466c5fd83b, but i don't know about it is a software to configure.
Since already grateful for any help.
M.Oliveira
[size=-1][/size][size=-1][/size]