Hey, i need to make a change on a PLC with a memory cartridge,
The maunal says
"Restoring a prgram from a Memory Cartridge"
To transfer the program from a memory cartridge to the s7-200 you must apply power to the s7-200 with the memory cartridge installed.
if any of the blocks or force values present in the memory cartridge are different from the blocks or force values in the s7-200, then all blocks present in the memory cartridge are copied to the s7-200"
And that doesnt works,
i need to send 2 memory cartridge to a client 1 with orginal program if something goes wrong and 1 with the update,
was trying this here at home and i cant get it to download it to the PLC when i try that the maual says.
Any tip?
The maunal says
"Restoring a prgram from a Memory Cartridge"
To transfer the program from a memory cartridge to the s7-200 you must apply power to the s7-200 with the memory cartridge installed.
if any of the blocks or force values present in the memory cartridge are different from the blocks or force values in the s7-200, then all blocks present in the memory cartridge are copied to the s7-200"
And that doesnt works,
i need to send 2 memory cartridge to a client 1 with orginal program if something goes wrong and 1 with the update,
was trying this here at home and i cant get it to download it to the PLC when i try that the maual says.
Any tip?