specialkc
Member
There is a pre existing setup that has multiple 12 slot chassis on a RSLogix5 system, one rack contains the processor, the others contain ASB modules always in slot O group O. It is set up for single slot addressing and therefore the ASB module racks (12 slots) are broken up into multiple groups (ie. Module group 1 with 8 cards, and module group 2 with 4 cards)
The problem is now converting from RSlogix5 to RSLogix5000 I added a DHRIO card and it only gives me the option for 8 slots within RSLogix5000 for an RIO Module.
Can it be configured for Single slot addressing?
Can a RIO Module be set up for a 12 slot configuration?
Thanks in Advance
The problem is now converting from RSlogix5 to RSLogix5000 I added a DHRIO card and it only gives me the option for 8 slots within RSLogix5000 for an RIO Module.
Can it be configured for Single slot addressing?
Can a RIO Module be set up for a 12 slot configuration?
Thanks in Advance