Reading Dig I/O with Red Lion G304K from Adam-4050
- Thread starter kenjohn
- Start date
DavidRojas
Member
What help did you need. Crimson 3 supports ICP DAS (DCON) protocol. You should be able to get access to Adam-4050 with that.
David Rojas
David Rojas
Similar Topics
Hello
I have a s7-1200 and I would like to read the tags present in this controller with my controllogix controller. The two controllers don't use...
Hi all,
i have 8 CJ2m plc units that show different numbers on the plc display and i am stuck on reading the info.
my unit has an ip address of...
Hi Everyone,
I am not proficient in RSLogix 500 so I have a question regarding the evaluation of N7:0 data as an input.
So as I understand in...
Trying to setup a message read via Ethernet.
I have the path setup as 1, 1, 2, 192.168.66.10
I get an error code 1, ext err 315.
I am beating...
Dear all,
I don't know why setup of password became challenging and weird. After setting up the password and try to upload the ladder from the plc...