150 SMC Flex Soft Starter

waqas

Member
W
Join Date
Mar 2023
Location
victoria
Posts
6
Hi,

I want to start 150 SMC Flex from Studio 5000. I have the AOP and P SMC flex AOI imported in my program. I have also set the logic mask to 32 for DPI communication. However, I am getting an error fault code #29 "loss of communication".
Please tell me how to start the SMC flex from my P SMC flex AOI? Do I need to set the instruction input bits or change any other parameters on the soft starter?

Thanks
 

Similar Topics

M
rslogix - 150 smc flex
Hey When i am adding 150 smc flex to the project, i need to change "Drive Rating", what is drive rating? I tried with help but still, cant...
Replies
0
Views
1,570
matatata
M
F
SMC flex 150 no load
Hello, I would like to start the SMC without load. How can I desactivate the fault 40 : no load thank you for answer
Replies
3
Views
4,360
Firoj_aga
F
D
AB 150 SMC Flex
Hi All, I have an Allen Bradley 150 SMC Flex that I need some help with. I have it set up with a 20-COMM-E card over ethernet back to my...
Replies
3
Views
4,962
dhuber
D
H
150-SMC-Flex : Help
Hello Friends, I am using about 30 number of 150-SMC-Flex devices on DeviceNet with 20-COMM-D Series-B module. I have installed the modules and...
Replies
2
Views
2,398
halburgepramod
H
ZestyMozzarella
Siemens 1200 Micro - 0-10 VDC - Ratiotrol VEL/VEH 150
I have a conundrum with this current circuit. I have a Siemens 1215C AC/DC/Relay and an old drive - Ratiotrol (now Boston Gear company I...
Replies
7
Views
1,174
Puddle
P
Back
Top Bottom