I am upgrading HSC modules and have some questions. I can't attach the manuals for reference as they are too large.
1746-HSCE uses M0:e.1/4 for a soft reset in the 1756-HSC would this be the same as O.ResetCounter.1?
1746-HSCE uses M0:e.1/12 as an enable/disable counter seems to be run during a first pass bit. I don't notice anything like this in the 1756-HSC can this rung be deleted?
Other than Nx moves (I believe can be done the same way between the two) is there anything else I should look into beside dip switch settings?
I have also attached how the 1746-HSCE referenced the soft reset and enable/disable.
1746-HSCE uses M0:e.1/4 for a soft reset in the 1756-HSC would this be the same as O.ResetCounter.1?
1746-HSCE uses M0:e.1/12 as an enable/disable counter seems to be run during a first pass bit. I don't notice anything like this in the 1756-HSC can this rung be deleted?
Other than Nx moves (I believe can be done the same way between the two) is there anything else I should look into beside dip switch settings?
I have also attached how the 1746-HSCE referenced the soft reset and enable/disable.