1746-N3 Connector

C McAlpine

Member
C
Join Date
May 2016
Location
Alberta
Posts
12
Does anyone know where to get either new or aftermarket 1746-N3 connectors and cables for SLC 32 point discrete in cards?

I have a used MCC that had some cut off and the E/I guys are struggling to find the means to connect the IO to the card. I thought Weidmuller made a solution but I am not finding any.
 

Similar Topics

R
1746-NI8 scaling problems
Hi, having some issues with scalings (SCP commands) with some Vegapuls 65 guided wave radar level transmitters. I've set the min/max in the...
Replies
5
Views
146
Robb B
R
A
1746-HSCE swap
I had a 1746-HSCE go suspected bad. have to swap the card in the morning. Other than dip switch settings is there any configuration to do?
Replies
1
Views
1,027
Ken Roach
Ken Roach
R
Fault on 1746 L551C
Happy Friday everyone! I recently installed a new module, 1746 NIO4I, into the last slot on this chassis. Got the normal IO mismatch fault, added...
Replies
5
Views
1,575
James Mcquade
J
J
1746-OW16 connection issue using 1747-AENTR
I am looking to replace a SLC5/05 processor with an AENTR adapter. Configured the rack in a compactlogix. The connection to all of the cards in...
Replies
5
Views
2,316
JBooth
J
M
Wiring Banner Q5X into a 1746-NIO4V
Heya guys, I'm looking to connect a Banner Q5XKILAF3000-Q8 (4-20mA) signal into my plc which have a analog input card 1746-NIO4V and was...
Replies
0
Views
1,082
Martindag
M
Back
Top Bottom