Dallyn Czar
Member
Hi, I have an analog input card on a slc 5/01. Im pretty sure everything is configured properly and the dip switches on the back are set to 4-20 like i want. Now i have a c02 transmitter wired in to a channel just a two wire device fairly simple. My issue is that the Module Status is solid green light which is fine but the channel status flashes green. The allen bradley documentation says to check the status bits But as far as i can tell they are all 0. Anyone have any idea what could be the problem, i cant see it being wiring or i should at least have an over/under range fault. Thanks