Hi !
I need to add 2 thermocouples on a 1746-NT4 card. The program was create on RSLogix 500 Ver.3.0 so they don't use the advanced config to set the thermocouple.
I search a lot but i don't understand how to config it.
I know it's config in this rung in the N9:10 but I don't understand where to enter the setting. In the manual, it tells me something with bit like 11 = 1 to enable the channel but i can't find where i enter that.
I want to understand how it works so i can change the other thermocouples settings too.
I'm afraid of if i use the advance config who is very easy that will bug cause the settings are already automatic in the N9:10 file. In the advance config all the settings is wrong (all default) but when online the temperature shown is good.
My thermocouples is K type in Fahrenheit.
I can't share the .RSS cause i work in a big compagnie with competitor.
Sorry my english isn't perfect.
If you need more information, tells me !
Thanks
EDIT : I use RSLogix 500 ver.8.30.01
I need to add 2 thermocouples on a 1746-NT4 card. The program was create on RSLogix 500 Ver.3.0 so they don't use the advanced config to set the thermocouple.
I search a lot but i don't understand how to config it.
I know it's config in this rung in the N9:10 but I don't understand where to enter the setting. In the manual, it tells me something with bit like 11 = 1 to enable the channel but i can't find where i enter that.
I want to understand how it works so i can change the other thermocouples settings too.
I'm afraid of if i use the advance config who is very easy that will bug cause the settings are already automatic in the N9:10 file. In the advance config all the settings is wrong (all default) but when online the temperature shown is good.
My thermocouples is K type in Fahrenheit.
I can't share the .RSS cause i work in a big compagnie with competitor.
Sorry my english isn't perfect.
If you need more information, tells me !
Thanks
EDIT : I use RSLogix 500 ver.8.30.01
Last edited: