1747-M13 Memory

yasirkhi

Member
Join Date
Oct 2011
Location
Toronto
Posts
136
Hi There,

I am using 1747-L552 processor which has 32k memory. And 87% has been used already.
If I use 1747-M13 memory will it be help to program extra ladders or any scan speed change.

Or someone please tell me what is main advantage using this memory beside backup program.

Thanks
 
The memory module is there to backup the program. It cannot be used to add extra memory for the running program.

The 1747-L553 has 64k
 
Last edited:

Similar Topics

Hello, i have installed the above memory modules in two slc 5/05 plcs at work but two of the same plcs will no let me store the program to the...
Replies
10
Views
11,675
Hello, i have installed the above memory modules in two slc 5/05 plcs at work but two of the same plcs will no let me store the program to the...
Replies
0
Views
3,064
Right now I'm looking at adding extra memory to a SLC 5/03 (1747-532) plc we have. What I need more memory for is recipes for data. I came across...
Replies
3
Views
1,536
Hi everyone, Added a 1747-M13 Memory Module to my SLC 5/04 processor. It has OS401 C 8 Firmware. When I try and save the program to the M13 I...
Replies
7
Views
4,305
hello I am getting a 57h fault - Specialty I/O module has not responded to a lock shared memory command within the required limit. Fault randomly...
Replies
0
Views
44
Back
Top Bottom