pct_jimmy
Member
I need a little help with my 1747-UIC;
I tried connecting in to a SLC 5/01 using the C-13 cable and as far as I can tell everything is as it should, Linx sees the UIC but no CPU, I tried it with a SLC 5/04 using the RS-232 port on the UIC and same thing. I can connect to the 504 with the serial port on my computer and everyhting works fine. I tried a Micrologix 1000 and the UIC took off and no trouble with it. I'm sure it's something I am missing but I'm at a loss as to what. I have attached a pic of my RSLinx configuration and the com port settings...
I tried connecting in to a SLC 5/01 using the C-13 cable and as far as I can tell everything is as it should, Linx sees the UIC but no CPU, I tried it with a SLC 5/04 using the RS-232 port on the UIC and same thing. I can connect to the 504 with the serial port on my computer and everyhting works fine. I tried a Micrologix 1000 and the UIC took off and no trouble with it. I'm sure it's something I am missing but I'm at a loss as to what. I have attached a pic of my RSLinx configuration and the com port settings...