1756 DHRIO/C Faulting Out 18F1 Code

Fourpaw

Member
Join Date
Mar 2007
Location
Florida
Posts
54
Has anyone seen this 18F1 fault code before? Haven't been able to find in any manuals.

In this condition, ChA DH+ indicator is OFF, ChB DH+ indicator is solid GREEN.

We reset the card (remove and reinsert into slot 11) and all is well again, until the next morning.

Thanks,
4
 
Never mind... got it.

Error 18F1:
1 = Channel A
8 = DH+ Interface Task
F1 = Connection-related fault

We think we've traced it back to a frayed wire on one of the DH+ connectors.
 

Similar Topics

I am doing a PLC5 to Controllogix upgrade (not using conversion software) I hooked up the 1756-DHRIO card to the existing (and working) Remote...
Replies
3
Views
2,769
We have a remove PLC rack that is being used to collect data from older equipment via a 1756-DHRIO module. This module occasionally faults out...
Replies
1
Views
416
I am trying to send some datas from PLC-5 to control logix plc through 1756-DHRIO. When I go online to PLC-5, Message instruction gives error &...
Replies
15
Views
3,375
:banghead: Remote I/O The occasional times i have had to deal with blue hose/PLC5 I/O addressing it always wrecks my head. Now i am working on...
Replies
9
Views
3,289
Called to a site and am neck deep currently ;) running, but issues. Phase 2 completion has been running for almost 2 years no issues. Controller...
Replies
3
Views
1,637
Back
Top Bottom