LMDAVE
Member
I'm currently trying to connect my controllogix system to a Powerflex 753 VFD. I installed the 20-COMM-R card in the VFD as a RIO adapter.
Whenever I set up the 1756-DHRIO module, under the channel devices the closest selection I have is Generic Remote I/O adapter, I set up the RIO address as 1, rack size (1/4) group 0, and the same info in the VFD, but I constantly get a red flashing light on the 1756-DHRIO channel, and the error is INVALID LINK ADDRESS.
It doesn't matter if I'm connected or not with the blue hose cable. I tried channel B, and reinstalling the module.
Any ideas of what may be wrong?
Thanks
Dave
Whenever I set up the 1756-DHRIO module, under the channel devices the closest selection I have is Generic Remote I/O adapter, I set up the RIO address as 1, rack size (1/4) group 0, and the same info in the VFD, but I constantly get a red flashing light on the 1756-DHRIO channel, and the error is INVALID LINK ADDRESS.
It doesn't matter if I'm connected or not with the blue hose cable. I tried channel B, and reinstalling the module.
Any ideas of what may be wrong?
Thanks
Dave