Hi. I have 2 ENBT/A cards in my control logix rack. The first card which I think is starting to go bad as it goes from running to unconnected states without throwing errors. I am trying to put the communications onto the second not faulted (yet) card. When I directed the outside application to the 2nd cards IP i got a connection fault.
My questions are is the 'internal status' going from run mode to unconnected status a good indicator of a bad card? And If I set the Domain Name, Host Name, subnet, gateway, and dns Under Internet Protocol Tab. To identical as the first card(Physical Module IP is still unique) would that prevent an application from connecting to my control logix? Such as Host name conflicts or something?
Any clue as to being able to move connection would be amazing. Original card is failing more often.
My questions are is the 'internal status' going from run mode to unconnected status a good indicator of a bad card? And If I set the Domain Name, Host Name, subnet, gateway, and dns Under Internet Protocol Tab. To identical as the first card(Physical Module IP is still unique) would that prevent an application from connecting to my control logix? Such as Host name conflicts or something?
Any clue as to being able to move connection would be amazing. Original card is failing more often.