alexbeatle
Member
Hello,
My 1756-RM2/A Redundancy Module keeps entering the Disqualified module for half an hour or so, and then switches to Synchronized for like 10 hours straight.
During failure, the Event Logs say:
1. Partner not on same link
2. Firmware failure (minor fault)
Checked the firmware of the module. it's same as the Primery Controller.
Any suggestions?
Thank you.
My 1756-RM2/A Redundancy Module keeps entering the Disqualified module for half an hour or so, and then switches to Synchronized for like 10 hours straight.
During failure, the Event Logs say:
1. Partner not on same link
2. Firmware failure (minor fault)
Checked the firmware of the module. it's same as the Primery Controller.
Any suggestions?
Thank you.