hazemabdulrab
Member
Hello,
I'm trying to replace a 1769-SDN devicenet scanner on a compactlogix system.
The issue i'm having is when i replace the scanner and power up, there is no "+" that shows for the 1769-sdn scanner for selecting to change address/baud rate.
When I open RSLinx Classic, Browse the Ethernet, then the CompactLogix, then the 1769-SDN, and look for a [+] sign for the DeviceNet network. The [+] is not there .
The error display alternates between: err and 08
I've attached an image of the original scanner which does have a [+] sign .
The {+} is missing when i put on the new scanner.
I'm trying to replace a 1769-SDN devicenet scanner on a compactlogix system.
The issue i'm having is when i replace the scanner and power up, there is no "+" that shows for the 1769-sdn scanner for selecting to change address/baud rate.
When I open RSLinx Classic, Browse the Ethernet, then the CompactLogix, then the 1769-SDN, and look for a [+] sign for the DeviceNet network. The [+] is not there .
The error display alternates between: err and 08
I've attached an image of the original scanner which does have a [+] sign .
The {+} is missing when i put on the new scanner.
Last edited: