Hi,
I am new user to AB PLC.
I am trying to add 1770-KFD driver through RSLinx but it is not being shown in the configured drivers list. What could be the reason?
I am following the following steps.
thanks
Regards
sanjay
I am new user to AB PLC.
I am trying to add 1770-KFD driver through RSLinx but it is not being shown in the configured drivers list. What could be the reason?
I am following the following steps.
1. Open your RS LINX program
2. Select Communications
3. Select Configure Drivers
4. Select Available Drivers
5. Select Add New
6. Select 1770-KFD
7. Click OK (But 1770 is not listed in the configured list)
8. Click Close
10. Minimise (but do not close) the RS LINX program
11. Open your RS NETWORX program
12. Click on Go online
13. Brouse for the network opens but 1770 driver is not seen in the list.
Please Help.
I have connected 1770 to the RS233 port and one device on the devicenet network.thanks
Regards
sanjay