8876dsmith
Member
Hi Guys,
I'm trying to figure out if a 1771-ASB (RIO Adapter) is good or not.
Using a 12 slot PLC-5 chassis.
Backplane SW=2 & 5 ON, all others OFF.
1771-ASB
SW1= All ON
SW2-1 & 4 ON all others OFF.
using blue hose with a term. resistor to a known good 1791-16AC (Grinder).
1771-ASB:
Active Light- Solid
Fault Light-Flashing (meaning module is in the wrong slot) It's in slot all the way at the left of the rack.
I/O Rack Fault- OFF
I've read a bunch of posts about this module and am afeared this may be an ungood unit. That would be a bummer.
Any ideas? Forward Thanks
I'm trying to figure out if a 1771-ASB (RIO Adapter) is good or not.
Using a 12 slot PLC-5 chassis.
Backplane SW=2 & 5 ON, all others OFF.
1771-ASB
SW1= All ON
SW2-1 & 4 ON all others OFF.
using blue hose with a term. resistor to a known good 1791-16AC (Grinder).
1771-ASB:
Active Light- Solid
Fault Light-Flashing (meaning module is in the wrong slot) It's in slot all the way at the left of the rack.
I/O Rack Fault- OFF
I've read a bunch of posts about this module and am afeared this may be an ungood unit. That would be a bummer.
Any ideas? Forward Thanks