CaspianSage
Member
Greetings,
I have a fair amount of experience with PLCs but I could use some help with remote i/o
I have a plc 5/11 and a 5/15 that I am trying to add a 8 slot remote chassis to both. A series b and a series a RIO adapter.
Both adapters Active and Fault lights come on briefly when powering up then go off. Does not matter which adapter I try with either processor. Have configured PLC 5/11 channelA for RIO 57.6 baud rack 3 starting group 0 and set appropriate transfer in/out sources. I have checked and re-checked dip switch settings on adapters and chassis.
Must be missing a dip switch setting but could use help finding out which one(s)
I thank you in advance.
-Caspian
I have a fair amount of experience with PLCs but I could use some help with remote i/o
I have a plc 5/11 and a 5/15 that I am trying to add a 8 slot remote chassis to both. A series b and a series a RIO adapter.
Both adapters Active and Fault lights come on briefly when powering up then go off. Does not matter which adapter I try with either processor. Have configured PLC 5/11 channelA for RIO 57.6 baud rack 3 starting group 0 and set appropriate transfer in/out sources. I have checked and re-checked dip switch settings on adapters and chassis.
Must be missing a dip switch setting but could use help finding out which one(s)
I thank you in advance.
-Caspian