jrowe4
Member
All, I turn to the wisdom of someone much more smarter than me. I have a guided wave level transmitter that I am installing inside a tank. The transmitter outputs a 4-20mA signal. The only analog module in my rack at the moment is a 1771-NIV isolated analog module. I would not like to install a 1771-IFE for one analog input, so I would like to use the 1771-NIV. I looked at the documentation for the card, and it states that for the NIV the channels use +5v(+20mA) signals. Will my 4-20mA signal work with this card?
This is the documentation I was looking at
http://literature.rockwellautomation.com/idc/groups/literature/documents/um/1771-um127_-en-p.pdf
This is the documentation I was looking at
http://literature.rockwellautomation.com/idc/groups/literature/documents/um/1771-um127_-en-p.pdf