Good Morning,
My company is building a new machine and one system it will need is a X-Y servo operated set of slides. The old machine has a similar system, but the interface for it leaves much to be desired. It is not operator friendly, and requires knowledge of machine shop G-code to be configured. We are not a machine shop, so this is a particular issue.
What I am looking for is something with a more simple interface, and that can be purchased as a complete system. The more "bolt-on" the better.
All ideas are welcome.
My company is building a new machine and one system it will need is a X-Y servo operated set of slides. The old machine has a similar system, but the interface for it leaves much to be desired. It is not operator friendly, and requires knowledge of machine shop G-code to be configured. We are not a machine shop, so this is a particular issue.
What I am looking for is something with a more simple interface, and that can be purchased as a complete system. The more "bolt-on" the better.
All ideas are welcome.