jrluckyman
Member
I have a micrologix 1200 with 2 comm ports.
1 is connected to an easy touch OI using DF1
The other is connected to a RF modem messaging to another micro 1200 and is also connected to a dial up modem for remote access.
I have the 2 modems connected to the same port thru a Black Box nonpowered port sharing device. I have a problem when going online with the dial up modem the message instruction thru the RF modems locks up with communication error. First is there a better way to share this port. Second does anyone have any idea what I might be doing wrong.
I have been programming several years, but due to a recent job change am new to remote comms. Any references would be welcome.
Thanks
John Rogers
1 is connected to an easy touch OI using DF1
The other is connected to a RF modem messaging to another micro 1200 and is also connected to a dial up modem for remote access.
I have the 2 modems connected to the same port thru a Black Box nonpowered port sharing device. I have a problem when going online with the dial up modem the message instruction thru the RF modems locks up with communication error. First is there a better way to share this port. Second does anyone have any idea what I might be doing wrong.
I have been programming several years, but due to a recent job change am new to remote comms. Any references would be welcome.
Thanks
John Rogers