percom74
Member
So the question is this..we have a machine with this PLC. The device level components are on A2 with a 192.168.###.### network scheme. Can we read data from the PLC on A1 using a different IP, Subnet and Gateway set up?
AB 5380 A1 A2 Network Access
- Thread starter percom74
- Start date
Scottryan03
Member
Yes, you can
TheWaterboy
Lifetime Supporting Member + Moderator
If you aren't using DLR than you certainly can.
Similar Topics
I have some logic that I have written within a 5380 series controller that tracks the time an event is started, while the event is running an RTO...
gents, I am trying to configure communication with EMERSON PK300 controller through port A1 using generic ethernet communication module . I could...
I want to factory Reset my 5380 (5069-L310) I have here in home lab.
Reason being I want to make a Internal How-To video for Setting the IP...
I had a comms fault between my VFD and Controller (5069-L320ERS2) that started about a month ago and happened maybe once a day to now where it...
Hello,
Just want to share my "experience" with newly received CompactLogix 5380. It's the first time I'm going to use this one. (I've been using...