Sensorless
Member
Hello All,
So a weird issue has been happening for me with an in service point I/O drop. I have a 1734-aentr com module, 3 standard I/O cards, a power supply module and then 4 safety I/O cards. The issue I am having is that the 1st and 3rd (Slot 4 & 6) safety I/O cards are losing their configuration which results in an E-Stop being triggered.
The fault code that displays is #0010 with a blinking green MS indicator.
Has anyone had an issue like this with their 1734 safety I/O??
All I have to do is cycle power to the drop and then it starts working again.
So a weird issue has been happening for me with an in service point I/O drop. I have a 1734-aentr com module, 3 standard I/O cards, a power supply module and then 4 safety I/O cards. The issue I am having is that the 1st and 3rd (Slot 4 & 6) safety I/O cards are losing their configuration which results in an E-Stop being triggered.
The fault code that displays is #0010 with a blinking green MS indicator.
Has anyone had an issue like this with their 1734 safety I/O??
All I have to do is cycle power to the drop and then it starts working again.