ABB CI873 interface with AB L73 through EN2TXT

gobinath

Member
G
Join Date
Feb 2024
Location
Malaysia
Posts
2
Hello Gents,
can i get some help here.
im working on ABB CI873 interface with Control Logix L73 through EN2TXT module.
EN2TXT is supervisory module meanwhile CI873 is the master.
I would like to know how to setup CI873 address mapping to poll data from L73. CI873 is belong to my counterpart as im working on EN2T.
any help will be appreciated. Thank you 111.png
 

Similar Topics

J
Weird Issue with ABB-CI873 and Control Logix
I currently have a weird issue involving Ethernet IP communication between a ABB CI873 (EthernetIP Module) and a 1756-L83ES. The Layout is as...
Replies
8
Views
756
gobinath
G
EICS
ABB PS501 Control Builder Plus V2.3 Install - anyone use it or know of it
does anyone have an install or know if/where i can download it for the following "ABB PS501 Control Builder Plus V2.3 " the software was a free...
Replies
2
Views
89
ojz0r
O
S
IE5 ABB motor and VFD
Hello, It is mandatory to use VFD IF i use IE5 electrical motor? What happens If connect it directly as delta without VFD? Please look at motor...
Replies
1
Views
141
kamenges
K
R
ABB ACS800-07 VSD fault on ramp up between 98 and 100%
Hi hoping someone can assist me with current issue I am experiencing with an ABB drive. Problem I’m experiencing is a ABB drive supply a large...
Replies
4
Views
210
BryanG
B
R
ABB AC500 (PM573-Eth) PLC Program Backup
Hello all, I have an ABB PLC (PM573) and it has without MC card. I need to take backup from PLC to PC (in automation builder v2.7 ). My...
Replies
10
Views
438
arpus4KM
A
Back
Top Bottom