sunil_work
Member
Dear All,
I am having compact control builder installed on 1 pc(pc-1) & connecting to abb plc (ac800m ) through opc server panel( ethernet connection).the download of the program code is working correctly.
I have another pc (pc-2)with wonderware- intouch installed. it is communicating with the abb plc through abb opc server panel( ethernet connection) correctly.
However, whenever i download a modified program to the plc through pc-1, the scada connection(in pc-2) to the plc gets disconnected.
When i try to reconnect from the opc server panel, it says that it needs some files, which even after browsing say that the revision number is incorrect."
I then need to manually copy files from "opc server for ac800m" folder from pc-1 & paste it to corresponding folder in pc-2 to restart the connection.
actually i tried configuring the working folder for opc , but there seems to be some mistake in that.
Kindly suggest as to what could be the mistake.
Thanks in advance.
Sunil Nair
I am having compact control builder installed on 1 pc(pc-1) & connecting to abb plc (ac800m ) through opc server panel( ethernet connection).the download of the program code is working correctly.
I have another pc (pc-2)with wonderware- intouch installed. it is communicating with the abb plc through abb opc server panel( ethernet connection) correctly.
However, whenever i download a modified program to the plc through pc-1, the scada connection(in pc-2) to the plc gets disconnected.
When i try to reconnect from the opc server panel, it says that it needs some files, which even after browsing say that the revision number is incorrect."
I then need to manually copy files from "opc server for ac800m" folder from pc-1 & paste it to corresponding folder in pc-2 to restart the connection.
actually i tried configuring the working folder for opc , but there seems to be some mistake in that.
Kindly suggest as to what could be the mistake.
Thanks in advance.
Sunil Nair