TimD
Lifetime Supporting Member
Hello All,
I have a remote SLC processor with some I/O I need to access via my main controller, which is a ControlLogix.
I tried adding the DH+ card to my I/O configuration, but got an error 16#ff00 Connection Request Error: No Connection Instance
Upon Googling this error, some engineers leave out the card from the I/O config altogether, which seems odd to me that the module profile exists, but that has to do with RIO mode, which I am not using.
Anyway, I need to access the I/O. So I was hoping for a jump start before I dive into the DH+ manuals tonight. I've commissioned my whole system up until the DH+ link
I appreciate any advice and help.
Thank You,
Tim
I have a remote SLC processor with some I/O I need to access via my main controller, which is a ControlLogix.
I tried adding the DH+ card to my I/O configuration, but got an error 16#ff00 Connection Request Error: No Connection Instance
Upon Googling this error, some engineers leave out the card from the I/O config altogether, which seems odd to me that the module profile exists, but that has to do with RIO mode, which I am not using.
Anyway, I need to access the I/O. So I was hoping for a jump start before I dive into the DH+ manuals tonight. I've commissioned my whole system up until the DH+ link
I appreciate any advice and help.
Thank You,
Tim