BoxerBrats
Member
OK working on a project
The customer has a exsisting AD 250 PLC we are adding a AD 450 PLC wich is networked through a router and controlled by a EZ Touch screen.
My question is how do I address my logic to each PLC.
The 450 PLC is node 2
The 250 PLC is node 1
When the customer start up production that equipment is controlled through the 250 PLC. I need for it let the 450 PLC know we are up and running and go ahead and start your equipment.
Thanks for any help, hopefully I explained ok
The customer has a exsisting AD 250 PLC we are adding a AD 450 PLC wich is networked through a router and controlled by a EZ Touch screen.
My question is how do I address my logic to each PLC.
The 450 PLC is node 2
The 250 PLC is node 1
When the customer start up production that equipment is controlled through the 250 PLC. I need for it let the 450 PLC know we are up and running and go ahead and start your equipment.
Thanks for any help, hopefully I explained ok