No matter what version of Logix I use I am trying to add a Ballluff block and when adding the program closes with no errors. I tried adding a Murrelektronik and Turck as well with the same results. I can add motion, comms modules etc just fine but seems to only happen with the io adapter modules.
Adding communication adapter module
- Thread starter GRACEC
- Start date
Rockwell TechConnect
https://rockwellautomation.custhelp.com/app/answers/answer_view/a_id/1138055
ID: BF28922 | Access Levels: TechConnect
Studio 5000 Application Error: Faulting module TagDetailsServer.dll when opening 3rd party device Module Properties, Exception 0xc0000409
TagDetailsServer.dll is at version 1.0.20.0
https://rockwellautomation.custhelp.com/app/answers/answer_view/a_id/1138055
ID: BF28922 | Access Levels: TechConnect
Studio 5000 Application Error: Faulting module TagDetailsServer.dll when opening 3rd party device Module Properties, Exception 0xc0000409
TagDetailsServer.dll is at version 1.0.20.0
Similar Topics
Hi Everyone,
Currently we have three plants running with Controllogix PLCs (L72, L73, L74). In each of these plants we have 2 FTView SE...
Hello,
Im building project with 1756-L82ES controller and 1756-IB16S card but i cant find it when trying to add the card to IO configuration...
Hello, I have a pair of redundant 1756-L71 controllers rev 24. These controllers currently have produced and consumed tag interfaces to 3 other...
I'm adding an IAI Gateway with 2 axes connected to it. To an ethernet network on my PLC.
So, I think the math is correct on the Input and Output...
Hi Folks.
I am gearing up to add a 2nd identical HMI to a project. This 2nd HMI will basically be an exact clone of the 1st one. The equipment...
