No matter what version of Logix I use I am trying to add a Ballluff block and when adding the program closes with no errors. I tried adding a Murrelektronik and Turck as well with the same results. I can add motion, comms modules etc just fine but seems to only happen with the io adapter modules.
Adding communication adapter module
- Thread starter GRACEC
- Start date
Rockwell TechConnect
https://rockwellautomation.custhelp.com/app/answers/answer_view/a_id/1138055
ID: BF28922 | Access Levels: TechConnect
Studio 5000 Application Error: Faulting module TagDetailsServer.dll when opening 3rd party device Module Properties, Exception 0xc0000409
TagDetailsServer.dll is at version 1.0.20.0
https://rockwellautomation.custhelp.com/app/answers/answer_view/a_id/1138055
ID: BF28922 | Access Levels: TechConnect
Studio 5000 Application Error: Faulting module TagDetailsServer.dll when opening 3rd party device Module Properties, Exception 0xc0000409
TagDetailsServer.dll is at version 1.0.20.0
Similar Topics
Hi,
I need help adding a new interlock switch to an existing circuit. I have never done on the existing circuit. I did set it up on the...
Hi all
I’m looking at adding a RFID card reader to comfort panel pro , how do you set the rfid up can you connect to existing users and password...
Hello all!
So I have one project with a S7-1214 and a MTP1500 "Project1" and one project with another S7-1214 "Project2".
Both of these PLC:s need...
Hi Everyone,
Currently we have three plants running with Controllogix PLCs (L72, L73, L74). In each of these plants we have 2 FTView SE...
Hello,
Im building project with 1756-L82ES controller and 1756-IB16S card but i cant find it when trying to add the card to IO configuration...