hi guys,
im using q series , GxWork 2 , ladder Programm
i got 14 modules connected.
Station 12- Aj65sbt-AD , Connect with 2 Diffrential Pressure Sensor (4~20mA)
Chn 1 + Chn 2 , then divide by 2 to get the average speed.
(2200)+(2000) / 2 = 2100
then i want to send it to
Station 14- VFD - Fr-A7NC
To set the frequency ...
But somehow i dono why?
it remain on the 30hz...the vfd dint ramp up or ramp up.
Can Anyone Pls explain to me?
im using q series , GxWork 2 , ladder Programm
i got 14 modules connected.
Station 12- Aj65sbt-AD , Connect with 2 Diffrential Pressure Sensor (4~20mA)
Chn 1 + Chn 2 , then divide by 2 to get the average speed.
(2200)+(2000) / 2 = 2100
then i want to send it to
Station 14- VFD - Fr-A7NC
To set the frequency ...
But somehow i dono why?
it remain on the 30hz...the vfd dint ramp up or ramp up.
Can Anyone Pls explain to me?