ALARM_S in Simatic v5.6 and WinCC 7.4

[userxyz]

Hi,

I just tested 2 ALARM_S SFC18 functions in an FB with instance to build alarm texts dynamically... like Program_Alarm in TIA. This works fine, the alarms are coming in de CPU messages the way I want them. To put this on alarm screen in WinCC Flexible, no problems. But how can we get these alarms in an alarm control on our WinCC ?

Thanks,

Kind regards,
C

 

[sigmadelta]

Look at page 71 of the pdf in the following link. Your WinCC Project must be integrated with your STEP 7 project.

https://support.industry.siemens.com/cs/document/34995306/wincc-%E2%80%93-examples-of-integrated-engineering-with-step-7?dti=0&pnid=14867&lc=en-US