James42005
Member
Hello, i am attempting to set up a new AB IO Link Master. Cat No 1732-8IOLM12R with a CLX L74 v32 though a EN2TR.
I set the IP via Boot/P without issue, the module is added to the tree, and i have uploaded the EDS file from the device on Linx. Everything appears to be talking happily except im showing a flashing red MOD led on the device and the module reports fault code 16#0010 "The state of the device prevents a service request from being handled". I have gone through every bit of documentation i can find and not getting anywhere. This is the only device on the network with a local IP address.
Anyone have experience settings these up?
I set the IP via Boot/P without issue, the module is added to the tree, and i have uploaded the EDS file from the device on Linx. Everything appears to be talking happily except im showing a flashing red MOD led on the device and the module reports fault code 16#0010 "The state of the device prevents a service request from being handled". I have gone through every bit of documentation i can find and not getting anywhere. This is the only device on the network with a local IP address.
Anyone have experience settings these up?