Hello everyone,
i am trying to setup modbus tcp communications between a micrologix 1400 series b PLC and two automation direct gs2 drives. the drives are connected to an automation direct zl-cdm-rj12x10 through rs485 cables. that module is connected to an automation direct mb-gateway module through 485 wiring. the gateway is connected to an ethernet switch through ethernet cable and the micrologix 1400 is connected to the ethernet switch through its ethernet port. I don't know how to set it up to get the devices to talk to one another. any help would be greatly appreciated.
i am trying to setup modbus tcp communications between a micrologix 1400 series b PLC and two automation direct gs2 drives. the drives are connected to an automation direct zl-cdm-rj12x10 through rs485 cables. that module is connected to an automation direct mb-gateway module through 485 wiring. the gateway is connected to an ethernet switch through ethernet cable and the micrologix 1400 is connected to the ethernet switch through its ethernet port. I don't know how to set it up to get the devices to talk to one another. any help would be greatly appreciated.