Hi,
Our company has an ABAR Vacuum Furnace from the 1980's, it uses an Allen Bradley 1772 PLC 2/20 Plc, serial 4455.
We currently input the logic program using a 1770 TA Series Industrial Terminal, copying from a 50 page printout (not very efficient). This is done if for some reason we lose the program (extended blackout, weak battery, etc.)
We know this is an old and obsolete PLC, right now we need assistance in the following areas:
1- Were can we find a manual for the use of the 1770 Industrial Terminal ? I have searched the Rockwell website, but have no found it. It is publication 1770-805.
2 - What software - cable alternatives are there to upload the logic Program ? Through google we found out of a company named SoftPLC, we would like to know if there are other additional companies.
Thanks for your help !
Our company has an ABAR Vacuum Furnace from the 1980's, it uses an Allen Bradley 1772 PLC 2/20 Plc, serial 4455.
We currently input the logic program using a 1770 TA Series Industrial Terminal, copying from a 50 page printout (not very efficient). This is done if for some reason we lose the program (extended blackout, weak battery, etc.)
We know this is an old and obsolete PLC, right now we need assistance in the following areas:
1- Were can we find a manual for the use of the 1770 Industrial Terminal ? I have searched the Rockwell website, but have no found it. It is publication 1770-805.
2 - What software - cable alternatives are there to upload the logic Program ? Through google we found out of a company named SoftPLC, we would like to know if there are other additional companies.
Thanks for your help !