I have a program that has a scp of 0v to Image dc and in the input minimum it has 1638 and the input max is 14736.
The scaled min is 0 and the scaled max is 500.'
The pressure transducer range is 0.5v to 5v.
The only info that I can find on the transducer is on the schematic that says 0.5v to 5v.
This machine is about 12 years old and the have been complaining at least 8 years that the pressure is reading is about 25 - 30 psi to high on the panelview.
My question is about the input minimum of 1638. Does this seem like it is correct? I thought it should be 0 as in the accompanied chart. Am I wrong?
Thank you.
The scaled min is 0 and the scaled max is 500.'
The pressure transducer range is 0.5v to 5v.
The only info that I can find on the transducer is on the schematic that says 0.5v to 5v.
This machine is about 12 years old and the have been complaining at least 8 years that the pressure is reading is about 25 - 30 psi to high on the panelview.
My question is about the input minimum of 1638. Does this seem like it is correct? I thought it should be 0 as in the accompanied chart. Am I wrong?
Thank you.
Last edited: